Im an exotic dancer here in the Houston area at a very high end / upscale club on the North side of Houston, not too far from Bush Airport. I have a lawyer friend who is one of my regular clients at the club. He has access through a long time close friend of his that gets fishscale ******* straight from Mexico. This stuff is the text book definition of what fishscale ******* should be. Shimmery / pearlescent. Comes in a nice solid lump that has the consistency similar to that of soft candle wax where the lump is firm but easily able with the tip of a razor blade to flake of small flakes. The solid lump has that shimmery / pearlescent look consistently through out the lump. The flakes have the same shimmery / pearlescent look. The shimmery / pearlescent look isnt just on the outside surface of the lump, but is consistent through out the lump. Meaning, if you brake the lump in half, the center part of the lump where the two halves come together, also have the same shimmery / pearlescent look. It chops up in to a very fine fluffy powder. The powder isn‘t crunchy or gritty / sandy like, but very fine and fluffy. The powder easily and quickly absorbed moisture from humid air causing the powder to become sticky causing it to clump together. It is quite numbing and quickly starts to numb your nose, lips, gums, tip of the tongue and back of the throat, with out causing your whole face to become numb. The high is very intense and the come down is minimal and not harsh.
Doing the old fashion bleach test results in what you want to expect with good quality stuff. It all quickly dissolves leaving zero un-dissolved residue on the surface or un-dissolved residue that quickly sank to the bottom.
I have done several EZ White purity tests on this stuff with each result showing that its of high purity. I’m also very close friends with someone who has a chemistry PhD and works for an independent company that is able to correctly test ***** for purity and detection of any alterations (cuts) found in the test sample. On 3 separate occasions I have given my close friend a sample of this Fishscale. Each sample he has tested ha resulted in being between 92% - 96% pure with the only alterations found were stuff used at the time it was manufactured and what alterations fund were due to how well the final cleaning of the ******* was before being pressed in to 1 kilo bricks and packaged for distribution.
********************************************************************************************************************************************************
I also know someone that takes average quality ******* found here in the Houston area and converts it from powder to ******* base and then converts it from the past back to powder. This process is an easier and quicker way from the “acid tone wash” process of cleaning *******.
Converting ******* powder to a past and back to powder cleans all the **** out of the *******, leaving the powder 90% + pure depending on how well the conversion process was done. It doesn‘t leave the ******* looking like “fishscale *******” with the flakey, shimmery / pearlescent look, but the powder still chops up very fine and fluffy and still easily and quickly absorbs moisture from humid air causing the powder to be stick / clumpy.
The high effects are very similar to that of real deal fishscale. Witch is a more affordable method that can be used where you can get $40 - $50 / gram 40% - 60% pure stuff and convert from powder to past back to powder turning it in to 90% + pure stuff that you can now sell for $80 - $100 / gram instead of the fishscale stuff my lawyer friend gets at $120 / gram.
