I have card, paper and plenty of goo, tonight Miss H it's just me and your box.
Miss Hybrid - official thread
- Thread starter blueboy80
- Start date
If anyone would like to have a go at this?
I remember the one Mister Shottis constructed last year xxx
Anyone who makes one and photos, it will get a photo back with me holding signing it or something, at some stage in the contest.
There may be other little prizes too. xxx
Mister Who??? is keeping a tally of votes again and I must say your performance is fantastic.
Quite a few TT members are on 100% thrusting power, some who will not remain nameless, will be called out in-front of the class for a variety of available punishments.
TT members will all get a photo at the end of the contest, to show their performance. A bit like an end of term Tart Mark.
If you have already blotted your copy, I may do it round by round and a combined score assuming, a) Who??? can do the sums and b) We get to the later rounds!
Miss VVHHH
Dearest Miss and Team Tart,
I took a chance at making a beautiful 2d rendering of Miss H. I gave it my best shot and looking at the completed product, I probably made a fold too many and ultimately put layers upon layers that probably shouldn't have been done. The end goal was to try and limit the amount of blank space in the figure which resulted in some pretty prevalent contortions. I know Miss H is flexible but even this may be a stretch, no pun intended.
As one of the newer worshipers of Miss H, I realize I haven't been around as long as the majority of you so I am still learning the proverbial ropes. If Miss H approves of my attempt then my only request is that the reward be shared among the team because I did this with Team Tart in mind. If Miss H wants to dish out punishment then I probably should take it alone (although if others want to share in that, then who am I to say no)
Okay, it's time to face the music and tart begging for forgiveness and/or receiving approval. Regardless of the result, this was done out of a labour of admiration and undeniable submission.
Miss H was straighter at one point but I had to go make and do some emergency folding for proportional purposes.
I know this likely won't score me brownie points but I wanted to show that I did a complete job and used all the pieces Miss provided.
jitna
Eternally hoping to lick Briana
i wonder what would happen if we put the design into a 3D printer?
If I shall give you some hints:
1. Before cutting out the single pieces scarve all fold lines with a sharp knife, using a ruler.
2. begin with part 1 and glue the floor an a piece of cardboard in same size.
3. then add part 2 from behind. The hip area is a little bit tricky, but I tried it out and it worked fine.
4. then add the glove parts 2a and 2b to stabilize the whole thing.
5. for further stabilization it may be helpful to close the hip area with a rectangular piece of paper before adding part 3. For getting the right dimensions of this piece you can copy the pussy area of part 3.
6. next comes part 3: first I would add the boots parts 3a and 3b for better stabilization. Cutting out the heels may be easier AFTER having glued together these parts!
7. fold and glue together the thighs.
8. it looks better if you also glue together the upper shaft pieces of the boots at the back of the knees.
9. before adding the whole part 3 to part 1/2 it may be better to close the upper end of the thighs first with a triangular piece of paper. That makes the assembling easier. For the contours of these triangular pieces you can copy the two cross hatched zones on the hips.
10. If you want to have the "stuffing option" you have to cut of course a short slit in the pussy :shock:
11. glue part 3 to part 1/2.
12. at last you can add the spurs. cutting out is an annoying job, but it looks not bad :rider:
13. READY :thumbsup:
From the man himself , RickY . RickY < RickY Riccardo DV
1. Before cutting out the single pieces scarve all fold lines with a sharp knife, using a ruler.
2. begin with part 1 and glue the floor an a piece of cardboard in same size.
3. then add part 2 from behind. The hip area is a little bit tricky, but I tried it out and it worked fine.
4. then add the glove parts 2a and 2b to stabilize the whole thing.
5. for further stabilization it may be helpful to close the hip area with a rectangular piece of paper before adding part 3. For getting the right dimensions of this piece you can copy the pussy area of part 3.
6. next comes part 3: first I would add the boots parts 3a and 3b for better stabilization. Cutting out the heels may be easier AFTER having glued together these parts!
7. fold and glue together the thighs.
8. it looks better if you also glue together the upper shaft pieces of the boots at the back of the knees.
9. before adding the whole part 3 to part 1/2 it may be better to close the upper end of the thighs first with a triangular piece of paper. That makes the assembling easier. For the contours of these triangular pieces you can copy the two cross hatched zones on the hips.
10. If you want to have the "stuffing option" you have to cut of course a short slit in the pussy :shock:
11. glue part 3 to part 1/2.
12. at last you can add the spurs. cutting out is an annoying job, but it looks not bad :rider:
13. READY :thumbsup:
From the man himself , RickY . RickY < RickY Riccardo DV
My dear Team Tart, do no be the least dismayed that we are only leading Miss FO , Miss Et and third in ET.
Making the second round is what counts.
What a fantastic job you are doing. I bet everyone wishes they had you as their team.
Well done TT
Kisses
Me
Making the second round is what counts.
What a fantastic job you are doing. I bet everyone wishes they had you as their team.
Well done TT
Kisses
Me
If I shall give you some hints:
1. Before cutting out the single pieces scarve all fold lines with a sharp knife, using a ruler.
2. begin with part 1 and glue the floor an a piece of cardboard in same size.
3. then add part 2 from behind. The hip area is a little bit tricky, but I tried it out and it worked fine.
4. then add the glove parts 2a and 2b to stabilize the whole thing.
5. for further stabilization it may be helpful to close the hip area with a rectangular piece of paper before adding part 3. For getting the right dimensions of this piece you can copy the pussy area of part 3.
6. next comes part 3: first I would add the boots parts 3a and 3b for better stabilization. Cutting out the heels may be easier AFTER having glued together these parts!
7. fold and glue together the thighs.
8. it looks better if you also glue together the upper shaft pieces of the boots at the back of the knees.
9. before adding the whole part 3 to part 1/2 it may be better to close the upper end of the thighs first with a triangular piece of paper. That makes the assembling easier. For the contours of these triangular pieces you can copy the two cross hatched zones on the hips.
10. If you want to have the "stuffing option" you have to cut of course a short slit in the pussy :shock:
11. glue part 3 to part 1/2.
12. at last you can add the spurs. cutting out is an annoying job, but it looks not bad :rider:
13. READY :thumbsup:
From the man himself , RickY . RickY < RickY Riccardo DV
I probably should have taken advantage of this before tarting the job
but I did spend a lot of time trying to make sure that there were no errant cuts and that the shape of Miss's alluring physique was as accurate as possible (minus the mediocre folding and what not)
Vanilla Bear
Bears For Life
So when I'm not giving you three you'll spank me right? But when I give you three, may I spank YOU then?FFS, Maley, it's 3!
Note how I folded this over for the other pics....?
Miss Spanking Maley
Of course you get three every day, mistress-goddess! No matter what! :heart: :bowdown:
Thanks for motivating me with the foot! Not that any motivation was needed.
And please don't cut your skin between your toes on the paper!
Vanilla Bear
Bears For Life
It's clear to me you will make it to round 2. The challenge is to be no 1 on all 3's. I think this year you'll suckseed.:bluesperm:
xxx
jitna
Eternally hoping to lick Briana
This years and last years Miss Hybrid Miss FreeOnes boxes.
now have the two of them face each and put this years on last years shoulders.
Pasty, GREAT JOB assembling Riccardo's very clever stuffing box for Miss Hybrid !! :thumbsup:
GO TEAM TART !!!!
GO TEAM TART !!!!
Then, it would be a very small team...
ChuckFaze
Closed Account
Miss Hybrid, check your Inbox at your Forum.
I sent you a Miss FreeOnes Siggy. You can add it to your Forum's collection.
And send it to FreeOnes Anders so that he can add it to the Official Miss FreeOnes Siggy thread so that anyone who wants to use it can do so.
I sent you a Miss FreeOnes Siggy. You can add it to your Forum's collection.
And send it to FreeOnes Anders so that he can add it to the Official Miss FreeOnes Siggy thread so that anyone who wants to use it can do so.
jitna
Eternally hoping to lick Briana
now i have to wait for someone to clean it out before i go...
Similar threads
